Cosmo de México exhibe en el Foro de Proveeduría Automotriz, Stand #359, Pabellón JETRO — del al , Poliforum León
Skip to Content
Capable and Versatile

LS-R740(SH)

The LS-R740SH is a differential pressure air leak tester that performs highly sensitive leak testing in super high pressure conditions.

Up to 16 MPa can be applied for leak testing.

Probador de fugas Cosmo LS-R740(SH) de alta presión
Icono de interfaz intuitiva del Cosmo LS-R740(SH)

Intuitive and easy-to-navigate interface with simple menu configuration.

Icono de visualización de forma de onda del Cosmo LS-R740(SH)

Test pressure and differential pressure waveform display.

Icono de compensación de ruido del Cosmo LS-R740(SH)

The influence of the noise generated during the test on the workpiece can be compensated, reducing the test time.

Icono de selección de idioma del Cosmo LS-R740(SH)

Three selectable languages: English, Chinese, Japanese.

Icono de puerto USB del Cosmo LS-R740(SH)

USB port for easy management of test data.

Icono de ubicación del sensor del Cosmo LS-R740(SH)

Closest location of the sensor unit to the target capsule.

Product features


General specifications

DPS
Resolution1 Pa
Display range± 9.999 kPa (guaranteed accuracy range ± 10 kPa)
Accuracy± 5% of the reading ± 1 Pa (500 Pa or less: ± 2 Pa)
Sensor test pressure20 mPa
Unit
Test accuracykPa, MPa (kg/cm2, psi, bar, etc.)
FiltrationPa, kPa, mL/s, mL/min, L/min, Pa·m3/s, E-3 Pa·m3/s, Pa/s, Pa/min, *Pa/s, *Pa/min (mmH2O, mmHg, inH2O, etc.)
Equivalent internal volumemL, L (in3, ft3)
Leakage screen4 digits, sampling rate: 10 times/sec.
Leakage limitUp to ± 999,9 Pa
No # of channels32 channels (0 a 31)
Timer999,9 seconds (resolution 0,1 seconds)
Power supplyAC100 ~ 240V ± 10%, 50/60Hz, 70VA max.
Ambient temperature5 to 45 ℃
Humidity80% relative humidity or less / no dew condensation
WeightController: approx. 2,6 kg. Pneumatic unit: approx. 15 kilograms
Pressure sourceClean, dry air. The source pressure must be sufficiently higher than the test pressure.
Pilot pressureClean, dry air, regulated between 500 to 700 kPa
Connection portPilot pressure: Rc1/4. Test pressure: Swagelok F6 mm (WORK and MASTER port)
UPCSH-2A 144 MHz, DRAM 8 MB
RS-232CTest parameters and test results are transmitted. Only test results are transmitted. Special formats.
USB portFixed length I/F, ID/F fixed length, Fixed length T/F, Others. Test data, test parameter. Trial, leakage, test pressure, channel number, timers, etc. Test the parameters of all configuration screens.

¿Buscas más información técnica del LS-R740(SH)?

Descarga el catálogo completo del fabricante Cosmo Instruments.