Capable and Versatile
LS-R740(WL)
The LS-R740(WL) is ideal for testing waterproof components or finished products that require IP protection rating. The part to be tested is placed in a capsule and pressurized to measure the pressure change caused by leakage flowing into the part.
Intuitive and easy-to-navigate interface with simple menu configuration
Test pressure and differential pressure waveform display
The influence of the noise generated during the test on the workpiece can be compensated, reducing the test time.
Three selectable languages. English, Chinese, Japonese.
USB port for easy management of test data
Closest location of the sensor unit to the target capsule
Especificaciones técnicas
Product features
General specifications
| Differential pressure | |
| Resolution | 0,1 Pa |
| Display range | ± 999,9 Pa |
| Accuracy | ± 2.5% of the reading ± 1 Pa, 50 Pa or less ± 2 Pa |
| Sensor test pressure | 5 mPa |
| Unit | |
| Test accuracy | kPa, MPa (kg/cm2, psi, bar, etc.) |
| Leakage rate | Pa, kPa, mL/s, mL/min, L/min, Pa·m3/s, E-3 Pa·m3/s, Pa/s, Pa/min, *Pa/s, *Pa/min (mmH2O, mmHg, inH2O, etc.) |
| K (Ve) leakage coefficient | mL, L (in3, ft3) |
| Leakage screen | 4 digits, sampling rate: 10 times/sec. |
| Leakage limit | 999,99 maximum |
| No # of channels | 32 channels (0 to 31) |
| Timer | 999,9 seconds (resolution 0,1 seconds) |
| Power supply | AC100 ～ 240V ± 10%, 50/60Hz, 70VA max. |
| Ambient temperature | 5 to 45 ℃ |
| Humidity | 80% relative humidity or less / no dew condensation |
| Weight | Controller: approx. 2,6 kg, Pneumatic unit: approx. 7,1 kg |
| Pressure source | Clean, dry air. The source pressure must be sufficiently higher than the test pressure. |
| Pilot pressure | Adjustment using the installed pilot pressure filter regulator: Range: 400 a 700 kPa |
| Port size | The special gasket is used only for the WORK and MASTER port pipes. Rc (PT) 1/4: pressure source, WORK and MASTER ports. |
| UPC | SH-2A 144 MHz, DRAM 8 MB |
| RS-232C | The limit values are transmitted, as well as the large and small leakage limits. LL-DET y S-DET test results are transmitted. 4 other available formats. Trial, leakage, test pressure, channel number, timers, etc. Test the parameters of all configuration screens. |
| USB port | M1K1, M3K4, ID2 format, L2 format, others. Test data, test parameter. |
¿Buscas más información técnica del LS-R740(WL)?
Descarga el catálogo completo del fabricante Cosmo Instruments.